Halco Rock Tools, UK Manufacturer of DTH Hammers and Bits. Halco pioneered the development and distribution of DTH hammers in the 1950s.
The Dominator 600 is one of the fastest 6" hammers specifically designed for high production drilling in blast hole applications.
 
The Dominator 600 is a class leader in performance and is suitable for drilling at a wide range of air pressures, excelling at higher working pressure.
Top adaptor with an internal N.R.V (Non-Return-Valve).
Revised chamber volumes and cycle timing to optimize performance.
Simplified piston geometry for improved balance and location within cylinder.
Air Consumption
 
Suitable for operation at air pressures of 100-507 PSI (7-35 bar).
 
Drilling diameters of 152 - 245mm (5.984 - 9.645").
Halco 6 shank reduces contact stresses and wear rates.
Tech Specs
Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Recommended Maximum Thrust
Dominator 600
600151
Halco
3 1/2" API Reg Pin
90mm (3.544") 
89Kg
139mm (5.472")
1208mm (47.559")
1500Kg (3300 lbs)
Drill Bit Overview
Halco 6
Diameter
Face
Buttons
Part
Number
650585
650939
650927
653474
650440
650441
650457
 
 
Oversize
 
 
 
Y
Y
Y
Y
Weight
(Kg)
23.5
26
26
30
34
42
49
Design
Convex
Convex
Flat
Convex
Convex
Convex
Convex
 
 
Type
Dome
Dome 
Dome
Dome
Dome
Dome
Dome
 
Qty & Dia
16 x 16mm
19 x 16mm
19 x 16mm
18 x 16mm 
20 x 16mm
26 x 16mm
27 x 16mm
 
mm
152
165
170
178
200
225
245
 
Inch
6
6 1/2
6 3/4
7
7 7/8
8 7/8
9 5/8
 
 
Additional bit configurations are available on request.