3″ Dominator 30
The Dominator 30 hammer is a high performance hammer for medium to hard rock conditions.
This hammer has no internal liner which allows a larger piston diameter for greater blow energy.
The Dominator 30 has fewer parts than other 3 inch hammers in the market, which allows for easy maintenance and servicing.
| At a Glance | |||
|---|---|---|---|
|
Size
|
Shank
|
Air pressure
|
Air flow
|
|
90mm - 105mm
3 1/2 - 4 1/8” |
IR3.5
|
100 - 362 psi
(7 - 25 bar) |
80 - 690 cfm
2265 - 19539 l/min |
| Hammer Overview | ||||
|---|---|---|---|---|
| Hammer Model | Dominator 30 | |||
| Part Number | 600424 | |||
| Shank | IR3.5 | |||
| Thread Connection | 2 3/8" API Reg Pin Up | |||
| Minimum Bit Diameter | 90 MM | |||
| Hammer Flat Size | 63MM (2.48") | |||
| Weight | 23Kg (83.8 Lbs) | |||
| Outside Diameter | 81mm (3.35") | |||
| Length (shoulder to shoulder) | 832mm (32.25") | |||
| Minimum Weight On Bit | 150 Kg (330lbs) | |||
| Maximum Weight On Bit | 300 Kg (660lbs) | |||
| Parts List | Maintenance Kits | ||||
|---|---|---|---|---|---|
| Type | Dominator 30 | Service Kit | Repair Kit | ||
| Shank | IR3.5 | ||||
| Item | Description | Part No. | SK27 | RK47 | |
| 1 | Thread Protector | 200111 | No | No | |
| 2 | Top Adaptor | 602980 | No | No | |
| 3 | O-Ring | 768098 | Yes | Yes | |
| 4 | Non Return Valve | 602328 | No | Yes | |
| 5 | N.R.V Spring | 760100 | Yes | Yes | |
| 6 | N.R.V Housing | 602971 | No | No | |
| 7 | Disk Springs | 760094 | Yes | Yes | |
| 8 | Thrust Washer | 602972 | No | No | |
| 9 | O-Ring | 768033 | Yes | Yes | |
| 10 | Air Distributor | 603108 | No | Yes | |
| 11 | Washer | 602979 | No | No | |
| 12 | Snap Ring | 783035 | Yes | Yes | |
| 13 | Piston | 603107 | No | No | |
| 14 | Cylinder | 602974 | No | No | |
| 15 | Spacer | 783036 | Yes | Yes | |
| 16 | Bit Retaining Ring | 602976 | No | Yes | |
| 17 | Chuck Spacer | 602977 | Yes | Yes | |
| 18 | Chuck | 602978 | No | Yes | |
| Foot Valve | 602922 | No | Yes | ||