6” Super Dominator 600

The Super Dominator 600 is one of the fastest 6” hammers specifically designed for high production drilling in blast-hole applications.

The Super Dominator 600 is a reduced weight hammer with waterwell drilling capabilities. The unique one piece top-adaptor with N.V.R. (Non-Return-Valve) makes it easy to maintain and service the hammer.

Super Dominator 600 requires only few tools to service and maintain the hammer. Suitable for operation at air pressures of 100 – 500psi (7 – 35bar). Drilling diameters of 152mm – 241mm (6 1/8 – 9 1/2”).

 
Air Consumption
AT A GLANCE
SIZE
SHANK
AIR PRESSURE
152mm - 241mm
6 - 9 1/2
DHD360
100 - 500 psi
7 - 35 bar
1500 Kg (3300 lbs)
Hammer Overview
Hammer Model SDOM600
Part Number 600272
Shank DHD360
Thread Connection 3 1/2" API Reg Pin Up
Minimum Bit Diameter152mm
Hammer Flat Size101mm (4.0")
Weight 100 Kg (220 lbs)
Outside Diameter 140.0mm (5.511")
Length (shoulder to shoulder) 1139mm (44.8")
Minimum Weight On Bit500 Kg (1100 lbs)
Maximum Weight On Bit
   
Parts List
Type SDOM600 Maintenance Kits
Shank DHD360 Service Kit Repair Kit
Item Description Part No. SK RK
1Thread Protector201701NoNo
2Snap Ring783050YesYes
3N.R.V Seat603872NoYes
4O-Ring768112YesYes
5Non Return Valve603554NoYes
6N.R.V Spring760135YesYes
7N.R.V Shield603652NoYes
8Top Adaptor603506NoNo
9O-Ring768140YesYes
10O-Ring768055YesYes
11Cylinder603584NoNo
12Piston602891NoNo
13Snap Ring783017YesYes
14O-Ring747105YesYes
15Bit Guide Bush602239NoYes
16Bit Retaining Ring603749NoYes
17O-Ring747105YesYes
18Chuck Spacer601942YesYes
19Chuck602495NoYes
Foot Valve601595NoYes