Siirry sisältöön
Home » Hammers » GP Range » 6” GP600 – QL60

6” GP600 – QL60

The GP600 is a high performance hammer which can drill under a head of water, typically suited to Waterwell and Geothermal applications due to its non-ported piston design.

It features a choke facility which helps to adjust air flow through the hammer.

At a Glance
Size
Shank
Air pressure
Air flow
152mm - 203mm
6 1/8 - 8
QL60
100 - 500 psi
(7 - 35 bar)
200 - 1570 cfm
5663 - 44457 l/min
Hammer Overview
Hammer Model GP600
Part Number 600427
Shank QL60
Thread Connection 3 1/2" API Reg Pin Up
Minimum Bit Diameter152 MM
Hammer Flat Size101mm (3.976")
Weight 86 Kg (132.3 lbs)
Outside Diameter 140mm (5.51")
Length (shoulder to shoulder) 1035mm (40.7")
Minimum Weight On Bit500 Kg (1100 lbs)
Maximum Weight On Bit1500 Kg (3300 lbs)

Air Consumption

Parts List Maintenance Kits
Type GP600 Service Kit Repair Kit
Shank QL60
Item Description Part No. SK68 RK105
1Thread Protector201701NoNo
2O-Ring604521NoNo
3O-Ring768140YesYes
4Shim - 4mm601946NoYes
Shim - 5mm601947NoYes
Shim - 6mm601948NoYes
Shim - 7mm601949NoYes
5Compression Ring760096NoYes
6Choke Plug Blank604480YesYes
Choke - 1/8"604481YesYes
Choke - 3/16"604482YesYes
7Non Return Valve604444NoYes
8N.R.V Spring760079YesYes
9Air Distributor604514NoNo
10O-Ring768043YesYes
11Liner604930NoNo
12Square Snap Ring604929YesYes
13Cylinder604517NoNo
14Piston604520NoNo
15Snap Ring783056YesYes
16Guide Bush604518NoYes
17O-Ring747105YesYes
18Bit Retaining Ring604693NoYes
19Chuck604692NoYes
Foot Valve602852NoYes

Related Bits